GLX Window frame saw


Glazing bead saw for all popular glazing beads PVC, Wood or Aluminium (optional)

for cutting of two glazing beads in an angle of 45° at the same time.

Product features:

  • Glazing bead saw for  45°/45° mitre cuts (single or pair cut).
  • Pneumatic saw feed, continuously adjustable.
  • Two-hand operating for safety during clamping and sawing process.
  • Unversal  clamping system for almost all glazing beads (independent from most profile structures).
  • Selector switch for clamping order: at the bottom-foot of the glass bead or horizontal as glass simulation unit continuously adjustable.
  • Suction connector included.
  • Maintenance unit with pressure reducer, pressure gauge and manual dewatering. Cleaning pistol incl.
  • Motor protection switch with Emergency Stop,
    saw movement from back to front.

Options:

  • Swarf extraction with pre-separator.
  • Profile support or roller table at the infeed-side, right or left.
  • Manual, digital or electronic length stop systems with PC control (see figure 1).
  • Safety and connection package for Posi-Touch.

Suitable for:

  • Window frames (PVC, Aluminium, Wood)
  • Picture frames
  • etc.


GLX Vario universal clamping system with glass simulation

The Vario universal clamping system with a variable two-stage clamping unit with a steplessly adjustable glass simulation has been specially designed for the cutting of PVC glazing beads in the production of windows and doors. The glazing bead is pulled and clamped at the holding foot. The horizontal clamping plates of the glass simulation straightened up the glazing bead in the position like when glazing bead is "snapped-in". This method ensures a clean look of the window corners.

According to the profile width, the horizontal plates of the glass simulation can be step less adjusted via hand wheel with a position display. The glazing bead saw GLX Vario is equipped with a profile support roller as an anti-tipping device vertical and horizontal.

The profile depending parts are usually universal within a profile system since they are only adapted to the respective holding foot. The shape of the glazing bead does not play any role in the optimal clamping process using the Vario clamping system.

Glaslijstenzaagmachine - Ferastraul pentru debitat baghete - Piły do cięcia listew przyszybowych - Såg glaspärlor - Junquilleras

Drive 2 x 0,45kw three phase AC motors
Saw blade (1 x left, 1 x right)
- 2 x 200 mm, Z=60
- 2 x 95 mm, Z=20
Cutting angle 45°/45° single or pair cut
Swarf extraction necessary 1100 Watt
Air pressure 6 bar
Suction connector: 80 mm
Dimensions 450 mm x 1140mm x 1200mm
Weight 125kg

ATENTION:

The window frame saw GLX may only be operated with a swarf extraction. For an additional charge we can deliver you a suitable RAPID unit for suctioning of swarfs and sections.
A cutout for welding beads is possible by two additional blades.
 

Options